Chiller introduction part 2

1. Installation environment

As a large-scale refrigeration equipment, industrial chillers are purchased by many companies to achieve rapid cooling and refrigeration, so as to achieve the temperature required for production, such as electroplating, plastics, and food industries. If the installation environment is bad, it will increase energy consumption. For example, put the chiller outdoors. It is recommended that if there is no room to store the unit equipment indoors (workshops, workshops, etc.), an external computer room can be built to prevent cold water. The unit can achieve rapid cooling and high-efficiency production only if preparations are made during the pre-installation;

2. Working hours are too long

If the chiller runs continuously without stopping, and the working time is too long, the chiller will be as tired as a human being, and the loss of parts will also accelerate. The editor recommends that customers and friends make a detailed working time for the chiller when using the chiller. If it is a large space factory, you can choose to install multiple chillers for alternate use, which can avoid the increase of consumables when using one alone. It can also reduce energy consumption;

3. The existence of the fault

If the cooling effect of the industrial chiller is slowly reduced, or even no cooling, then all customers and friends should pay attention to it. At this time, there is a fault problem. After discovering that there is a problem, the staff who manages the chiller should check the chiller immediately The internal situation should be repaired in time or contact the chiller manufacturer for maintenance, instead of letting it go. If you let it go, then the chiller may be abandoned.

LESINTOR mechanical and electrical equipment Co., Ltd. specializes in the production of all kinds of chiller, industrial chiller, screw chiller, water cooler, air cooler, air cooled heat pump, explosion-proof chiller, low temperature chiller, low temperature salt water machine, mold temperature machine, etc.Deep industrial refrigeration more than 30 years, has rich experience in a variety of industries refrigeration.