Lesintor - 20+Years Industry experience, Professional plastic crusher manufacturers
Medical Plastic Products
Medical Plastic Products Solutions by LESINTOR
We specialize in providing GMP-compliant full-process raw material handling systems for medical products such as syringes, infusion tubes, surgical instruments, etc. We provide clean handling from recycled materials to newborn materials and help our customers to pass the stringent certifications such as FDA, ISO 13485, and so on.
Medical plastic products face tough challenges in the manufacturing process:
● High risk of contamination
● Equipment cleaning dead ends are prone to bacteria growth (common in traditional pulverizing/mixing equipment)
● Medical grade materials (e.g. PP, PC, PEEK) are sensitive to water content (≤0.02%)
● High energy consumption affects the stability of the cleanroom environment
● High risk of contamination
● Equipment cleaning dead ends are prone to bacteria growth (common in traditional pulverizing/mixing equipment)
● Medical grade materials (e.g. PP, PC, PEEK) are sensitive to water content (≤0.02%)
● High energy consumption affects the stability of the cleanroom environment
● The trapezoidal design of the actuator allows for the use of forceful disintegration, resulting in a greater chip force.
● Heavy-duty bearings and oil seals with a sound-proof spacer keep vibration away to ensure that the workpiece is not contaminated with grease.The workpiece is free from grease and oil contamination.
● The motor is equipped with an overload protection system and a power interlocking system with a large-size cleaning device.
● The large-size protective system ensures safety during cleaning.
● Heavy-duty bearings and oil seals with a sound-proof spacer keep vibration away to ensure that the workpiece is not contaminated with grease.The workpiece is free from grease and oil contamination.
● The motor is equipped with an overload protection system and a power interlocking system with a large-size cleaning device.
● The large-size protective system ensures safety during cleaning.
● Cooling temperature range 5℃-50℃.
● Anti-corrosion water tank; anti-icing protection device.
● Adopt R22 refrigerant, good cooling effect.
● The refrigeration circuit is controlled by high and low voltage switch.
● Anti-corrosion water tank; anti-icing protection device.
● Adopt R22 refrigerant, good cooling effect.
● The refrigeration circuit is controlled by high and low voltage switch.
no data
Plastic raw material drying：Energy Saving Dryer
| Raw Material Temperature Reference Table | ||||
| Material | Drying temperature | Drying time | ||
| PE.PP | 80℃ | 2 hours | ||
| PS | 82℃ | 2 hours | ||
| ABS | 82℃ | 2 hours | ||
| Cellulose series | 71℃ | 2 hours | ||
| Polycarbonate | 120℃ | 2 hours | ||
| Nylon | 82℃ | 2.5 hours | ||
| PVC | 71℃ | 1.5 hours | ||
| PET | 155-175℃ | 3 hours | ||
Service Support
24 hours quick response, lifelong technical support.
no data
Quick Links
products
Leave A Message And We Will Contact You
Let's Have A Chat