loading

Lesintor - 20+Years Industry experience, Professional plastic crusher manufacturers

LESINTOR Wraps Up the 2026 Shanghai Packaging Expo

Five days at booth W5K51, and the questions buyers kept asking

Lesintor stand at booth W5K51, 2026 Shanghai packaging exhibition
The Lesintor stand at booth W5K51 during the 2026 packaging exhibition in Shanghai.

The 2026 packaging exhibition in Shanghai has closed, and the Lesintor stand at booth W5K51 came down after a full week of back-to-back conversations. Exhibition weeks are usually judged by the number of business cards collected. We judge them by something less tidy: whether the questions visitors asked were the same questions their production managers ask us on a factory visit. This year, they were.

What stood on the stand

The booth was built around one idea rather than a product list: the auxiliary equipment around a moulding machine should be specified as a system, not bought item by item. That is why the stand carried a working line rather than isolated machines — chilling, granulating, drying and conveying in one row, so a visitor could see how the pieces connect.

Equipment family What it does in the line Who stopped to look
Industrial chillers Holds mould and process temperature at 5–50℃ Packaging moulders running thin-wall containers
Granulators Returns sprue and rejects to regrind Plants comparing regrind quality, not just throughput
Hopper dryers and dehumidifying dryers Removes surface and absorbed moisture Processors running PA, PET and engineering grades
Conveying and loading Feeds material without opening the hopper Anyone trying to reduce manual handling on the floor
Chillers, granulators, dryers and conveying equipment on the Lesintor stand
Chillers, granulators, dryers and conveying equipment on the stand, arranged as one working line.

Standing next to each other, the machines answer a question a catalogue cannot: how much floor space the whole set actually takes, and how much of it is walkway. More than one visitor measured the aisle with their hands before asking for a drawing.

The three questions that came up most

Across the week, the same three subjects returned in almost every conversation.

"What is the real cooling capacity at our ambient?" Packaging plants in southern China run hot for much of the year, and a chiller sized on a nameplate figure can fall short in July. The useful part of those conversations was not the capacity number but the conditions behind it — which is the same problem the datasheet hides. Buyers who arrived with a measured heat load left with a model number; buyers who arrived with press tonnage left with homework.

"Will the regrind go back into the same product?" For thin-wall packaging, regrind quality is a product decision, not a waste-handling one. Flake size distribution and fines decide whether the material can return to the same moulding job or has to be downgraded. That moved the conversation from "how many kilos an hour" to rotor type, blade condition and screen choice.

"How much of this can one operator run?" Labour is the constraint that packaging moulders raised most often, and it changes what auxiliary equipment is worth. A dryer with integrated conveying removes a refill step; a granulator placed at the machine removes a trip across the floor. Neither shows up in a price comparison of individual units, and both show up in headcount.

What the show said about the market

Three things were visible in the questions themselves, independent of any single machine.

Floor space is being treated as a cost. Several visitors were re-laying out existing halls rather than building new ones, and were looking for equipment that stacks, nests or fits under a mezzanine. Compact footprint came up in nearly every specification discussion, and it is the reason the stand's layout — a working line rather than a wall of machines — drew more attention than any single unit.

Energy is being measured per kilogram, not per machine. Buyers asked about power draw in relation to output far more than they asked about installed kilowatts. That is a healthier question, because it puts the auxiliary equipment in the same frame as the moulding machine it serves.

Service distance is part of the specification. For export visitors, the deciding factor was often how quickly a technician or a spare blade can arrive, not the price of the unit. Several conversations ended with a request for the local service arrangement before any technical detail.

From the stand to the factory

An exhibition closes a conversation; it does not finish a project. What follows for the enquiries taken at W5K51 is a familiar sequence: a site layout drawing, a measured heat load or material sample, a model selection with the utility requirements attached, and then a factory visit or a reference installation.

Two practical notes for anyone who spoke to us and has not yet sent the follow-up material. First, the numbers that matter most are measured ones — a flow and temperature reading from the existing cooling circuit is worth more than any nameplate comparison. Second, if the project involves regrind returning to a food-contact or thin-wall application, send the material grade and the target flake size at the same time as the throughput figure; those two details decide the machine, and they are the two details most often missing from an initial enquiry. A note on what we will not do at this stage: quote a machine before the utility requirements are known. A chiller quoted without a tower specification, or a granulator quoted without the regrind target, is a number that will change later.

The Lesintor team at the close of the 2026 Shanghai packaging exhibition
The Lesintor team at the close of the show, booth W5K51.

Thank you

To everyone who stopped at W5K51, asked a hard question, and then came back with a colleague to ask it again — thank you. The stand is packed away, but the conversations are not: the team is following up on every enquiry taken during the week, and the technical files requested at the booth are going out in the order they were promised.

Lesintor builds plastic auxiliary equipment — chillers, granulators, dryers, and conveying systems — from its base in Suzhou, and exhibits at packaging and plastics shows through the year. If you visited the stand and would like the specification documents for anything you saw, or would like to arrange a factory visit, the same team that staffed booth W5K51 will answer. If you would like to meet the team in person rather than by email, ask for the current exhibition calendar — the shows and booth numbers are sent out as they are confirmed.

FAQ

Where was the Lesintor booth at the 2026 Shanghai packaging exhibition? Booth W5K51, in hall W5.

Which machines were on display? A working line of auxiliary equipment: industrial chillers, granulators, hopper and dehumidifying dryers, and conveying and loading units, arranged so visitors could see the system rather than isolated machines.

Can I still get the documents I asked about at the show? Yes. Follow-up on booth enquiries is in progress; if you have not received the file you requested, send the material grade and target output and the team will match it to the machine you saw.

Will Lesintor exhibit again in the coming season?

Yes, the exhibition calendar continues through the year. Ask the team for the current list of shows and booth numbers; they are shared as each one is confirmed, along with the equipment that will be on the stand.

Were the machines on the stand running?

The machines stood as one line rather than as isolated units, so visitors could follow the sequence — chilling, granulating, drying, conveying — and see how the pieces connect. Anything shown in a photograph here can be quoted as a single unit or as a matched set, depending on what the plant already has.

prev
Three-in-One Dryer LXT-CDY: Reaching -40°C Dew Point
recommended for you
Get in touch with us
Tel
+86 15851665433
sales6@lesintormachine.com
+1 628 488 4101
Wuqiao Vilage, Lili Town, Wujiang District, Suzhou City, Jiangsu Province, China
Leave A Message And We Will Contact You
Let's Have A Chat
Copyright © 2026 LESINTOR | Sitemap |  privacy policy
Contact us
phone
email
wechat
whatsapp
Contact customer service
Contact us
phone
email
wechat
whatsapp
cancel
Customer service